Site Information

 Loading... Please wait...
  • Call us on 866-286-8046
  • My Account
  • Gift Certificates

Clicker Info

Die  Cutting   Solutions

 

 

 

 

 

Tippmann Industrial Products, Inc.

Offering experienced based die cutting solutions for over  15 years.

 

Tippmann Clicker Presses

 

Since 1991 Tippmann Industrial Products has been developing turn key die cutting solutions for a variety of different industries. Tippmann Clickers are unique in that they are completely  pneumatic with no electronic controls.These die presses are lightweight and compact,and offer an affordable, virtually  maintenance free alternative to other die presses of the same tonnage.

 

Our customers have found hundreds of different uses for the clicker.The present uses of Tippmann Clickers include, but are not limited to:die cutting gaskets,rubbers, leather,vinyl, plastics, diapers,carpet,lab grown human skin,body bags,medical devices,and much more.

 

Most of the presses we sell involve trade secrets, and we are not at liberty to discuss their uses.

 

These are versatile,  compact die presses that can be customized to fit your specific product needs.We specialize

in developing turn-key  solutions.If you send us a sample of the material you are looking to cut or press,we can put together a system to start production. We will shoot a quick video of the Clicker being used for your application and email it back to you within 24 hours. You will find that the Tippmann Clicker has a very simple,useful design,and willproduce consistent results for  many years.

 

The Tippmann Clicker is built right. It all starts with the C Frame. Each C Frame is tested and rated to 8 tons of pressure. The 7 ton press has two C Frames and the 15 ton press has four . The clickers have very few moving parts, reducing wear and tear.The vinyl  bladder is hand formed and tested to 125 psi, ensuring long lifeand cutting power.The platens are precision  machined and ground.

 

While we do offer some accessories for our Clicker line, it is important to note that we customize clickers to your specific application . Some of our customers customize their own presses. Most of these changes to the press do not affect the one year parts and labor warranty .

 

As our presses are used in many different industries and applications , we offer the presses as a base model. If you are subject to OSHA regulations, we can install 2 Hand No Tie Down controls.Also , please read OSHA 'sguidelinesfor  pneumatic  presses.It is important to understand OSHA 'sdefinitions and recommendations for clicker presses.

 

As manufacturers ourselves, we understand your need to have a dependable, cost effective machine that gets the job done. If we believe that our press is not the best answer for your project, we will NOT try to sellyou something you do not need.

 

 

Tippmann  Industrial Products, Inc.3518 Adams Center Rd.

Ft. Wayne , IN 46806

 

TOLL FREE: 866-286-8046

PHONE:260-441-9603

FAX:260-441-8264


 

www.tippmannclicker.com


 

Hours of operation:

Monday-Friday 8:30a.m.- 5:30 p.m. (eastern time zone)


Clicker 700                                   

 

The Tippmann Clicker 700 delivers 7 tons of cutting pressure at the touch of a button. With this kind of cutting power, you can count on the Clicker 700 to deliver a perfect die cut every time.The Clicker can cut a wide range of materials such as plastics,rubber,fabrics, gaskets,leather,paper stocks,etc.This isa very versatile machine.

 

 

 

The Clicker's cast-iron "C" frames allow for easy loading of dies and materials. Just place the die and material on the Cutting Deck, press the Dual Palm Buttons,and in less than three seconds you will have a perfect die cut.

 

Designed with very few moving parts, Clickers are easy to operate and maintain. The Tippmann Clicker patented Air System raises the Cutting Deck to give you 7 tons of cutting pressure.Requiring no electricity or hydraulics, this die cutter operates off of 80-110 PSI of air pressure.

 

The Clicker ?OO's medium capacity cutting area (12"x 12") allows for countless die cutting patterns.Tippmann also manufactures the Clicker 1500 which delivers up to 15 tons of cutting pressure and has a (12" x 24") cutting area.

 

Don't forget to view our custom die section. We can manufacture just about any custom die to your exact specifications.

 

All Tippmann Machines come with a one year warranty on all parts and labor and a 30 day money-backguarantee .

 


\ - ---- 'l


Attractive Tippmann "Clicker" Features

Air operated die cutting machines deliver tons of pressure at the touch of a button.


"'                                          •  NO electricity or hydraulics required.These machines operate off of 80- 110 psi

  •    Die cut plastics, rubber,fabric, gasket material,leather,paper card stocks,etc.
  •    Compact size
    •    Large cutting capacity
    •    Heavy cast iron C frame construction permits side or front loading
    •    Very low maintenance with only a few moving parts
      •    Dual palm buttons
      •    Very Low price


 

 

 

 

Clicker 700

 

•   Make.................................................................Tippmann

•   Model..............................................................Clicker 700

•   Cutting Pressure.......................................................? ton.

• Cutting Beam......................................................12" x 12"

• Cutting Area ........................................................12" x 12"

•   Deck clearance...........................................................2.0"

Travel of deck is adjustable up to .................................1.0"

• Recommended die height...........................................1.25"

• Approximate Shipping weight. .................................260 lbs

• Operating Pressure..........................................80-110 PSI

Overall Dimensions .............................12"W,19" D, 13" H


 

 

 

 


Clicker  1500                          

The Tippmann Clicker 1500 delivers 15 tons of cutting pressure at the touch of a button. With this kind of cutting power, you can count on the Clicker 1500 to deliver a perfect die cut every time.The Clicker can cut a wide range of materials such as plastics, rubber, fabrics , gaskets,leather, paper stocks,etc. This is a very versatile machine.

 

The Clicker's cast-iron "C" frames allow for easy loadingof dies and materials.Just place the die and material on the Cutting Deck,press the Dual Palm Buttons, and in less than three seconds you will have a perfect die cut.

 

Designed with very few moving parts, Clickers are easy to operate and maintain. The TippmannClicker 1500 patented Air System raises the Cutting Deck to give you 15 tons of cutting pressure. Requiring no electricity or hydraulics, this die press operates off of 80-110 PSI of air pressure.

 


The Clicker 1500's large capacity cutting area (24"x 12"  allows for countless die cutting patterns.Tippmann also manufactures the Clicker 700 which delivers up to 7 tons of cutting pressure and has a (12" x 12") cutting area.


 

    $2995.00


 

Don't forget to view our custom die section. We can manufacture just about any custom die to your exactspecifications.

 

All Tippmann Machines come with a one year warranty on all parts and labor and a 30 day money-back guarantee .

 

Attractive Tippmann "Clicker" Features

Air operated die cutting machines deliver tons of pressure at the touch of a button.

 

  •    NO electricity or hydraulics required. These machines operate off of 80-110  psi
  •    Die cut plastics, rubber,fabric, gasket material,leather, paper card stocks,etc.
    •    Compact size
      •    Large cutting capacity
      •    Heavy cast iron C frame construction permits side or front loading.
      •   Very low maintenance
        •    Dual palm buttons
        •    Very low price

 

 

 

 


 

Clicker 1500

• Model............................................................Clicker 1500

• Cutting Pressure............................................... ......15ton.

Cutting Beam...................................................... 24" x 12"

•  Cutting Area ........................................................24"x 12"

•  Deck clearance...........................................................2.0"

Travel of deck is adjustable up to .................................1.0"

• Recommended die height........................................... 1.25"

Approximate Shipping weight. .................................560lbs

• Operating Pressure.......................................... 80-110 PSI

Overall Dimensions.............................24" W, 20" D, 14" H


 

 


 

 

 

Tippmann is pleased to offer a full line of accessories for the Clicker 700 and Clicker 1500. These genuine Tippmann Accessories enhance the performance and functionality of your Clicker without compromising your equipment warranty. In addition the listed accessories , we can also quote a custom design to your specifications .

 

 

Air Accumulator

Speed up your cycle time by having an air accumulator installed. This cost effective upgrade will cut your cycle time in half

 

 

 

$450.00

 

 

Casters

You can turn your Tippmann Clicker Press into a mobile workstation by adding easy glide casters to either your Clicker 700 stand or your Clicker 1500 stand. These casters are designed for control and manual move applicationsand are a popular choice for all types of settings such as, but not limited to; assembly lines, scientific and electronics laboratories, agriculture lines, etc.

$120.00

 

 

 

Clicker 1500 Stand

The Clicker 1500 heavy duty stand and table top surface lines up perfectly with the cutting deck, which allows you to slide the material in and out of the clicker with ease. This stand is constructed of heavy duty cast steel with a solid wood tabletop surface.Table top surface measures 48"w x 32"d and surface

height=35"h.

 

$450.00

 

 

 

Clicker 700 Stand

The Clicker 700 heavy duty stand and table top surface lines up perfectly with the cutting deck,which allows you to slide the material in and out of the clicker with ease.This stand is constructed of heavy duty cast steel with a solid wood tabletop surface.Table top surface measures 32"w x 24"d and surface height=35"h.

 


$220.00


 


 

 

 

 

 

 

OSHA approved 2 hand no tie downs dual palm controls

If you mandate OSHA compliance, we can handle it. Our 2 hand no tie down dual palm controls"will bring your Clicker up to standard. The dual palm controls will not let the machine operate unless both the left and right buttons are held simultaneously .

 

$450.00

 

 

 

 

 

 

Slide Deck

The slide deck allows you to slide the entire cutting deck in and out of the machine in order to load the material and die. This will allow you to view the exact location of your die and material when loading.

 

 

$220.00


 

 

 

 

 

 

 

 

 

 

 

 

 


Lease Info

 

 

 

Tippmann Industrial Products Clicker Leasing Program

 

Tippmann Industrial Products is happy to offer an affordable leasing program on our line of Clicker die cutting equipment and accessories . Our leasing programs give you the ability to pay for your clicker over a period of 2 - 5 years,allowing for low monthly payments .

 

At the end of the lease, your buy out is $1 and you own the machine free and clear. (Direct Capital also offer FMV leasing options. )

 

Here is how the lease program works.

First, we will determine which machine works best for you and the length of the lease which you are interested in. Lease programs range from 2 to 5 years.We can then go over the lease application over the phone,or if you would prefer,you can download the applicationand email it back to us. We also accept applications via fax,or via  the  Equipment  Financing Center  powered by Direct Capital Coro.

 

Once your credit has been approved,our leasing company (Direct Capital Corp.)will send you the lease/purchase agreement on your machine(s). After Direct Capital Corp.has received your security deposit and lease agreement , we will notify you of the ship date.Normally our product will ship within 24 hours of receiving the purchase agreement.

 

If you have any questions or would like to purchase a machine, please call Tippmann Industrial Products,

TOLL FREE: 866-286-8046.

 

We have provided a basic lease payment outline and example as well as a payment calculator . Please feel free to call Tippmann with any questions.

 

The rates below are based on good credits. Marginal credit ratings and startup businesses may require additional advance payments and/or higher rate factors .

 

2 months payment are held as security deposit and returned at the end of the lease.